Summary:Air compressors,are equipment that provides compressed air for the production and manufacturing of enterprises. They compress the atmospheric pressure...
,are equipment that provides compressed air for the production and manufacturing of enterprises. They compress the atmospheric pressure air inhaled from the outside to make it have a certain pressure, and are widely used in all walks of life. The importance of compressed air is self-evident. Equipment startup, mechanical operation, and production work are inseparable from compressed air. If the air compressor cannot be started, the user will be very troubled, which will definitely affect the smooth progress of the production work. The main reasons for the air compressor not starting are as follows:
Electrical aspects: First check whether the power wiring of the air compressor is correct, whether the power switch is properly closed, whether the power fuse is blown, and whether the power supply voltage reaches 90% or more of the rated voltage. Check whether the components of the pressure relay of the air compressor are damaged and whether the given value of the pressure relay is appropriate.
Operation failure: When starting, the outlet switch is not turned on, the outlet pressure is set too high, the switch after the electrical circuit is not restored, and the voltage and current settings are unreasonable, etc.
General Rotary screw air compressors
are equipped with automatic protection devices, so when some parts of the compressor are faulty, they cannot be started normally. Start and stop the control loop, because there are more electrical components and more control points, the failure rate also appears relatively more. The start button, stop button or switch, etc., may cause the host to fail to start or stop due to improper operation. Common mechanical failures that cause the air compressor to fail to start normally include: start button, stop button, emergency stop button, control panel failure, etc. If you do not pay attention during operation, and use too much gas when the button is used, it may cause the button to get stuck in the button. on the edge of the casing and cannot be reset.